R958 marble glue is a modified unsaturated polyester resin adhesive that reacts with a curing agent at room temperature to form a high-hardness solid after curing. It is widely used in the rapid positioning, repair and bonding of natural stone, artificial stone, ceramics, and vitrified tiles , Parquet.
Ruilangda R958 marble glue is a modified unsaturated polyester resin adhesive that reacts with a curing agent at room temperature to form a high-hardness solid after curing. It is widely used in the rapid positioning and repair of natural stone, artificial stone, ceramics, and vitrified tiles , Bonding, parquet.
Marble glue product characteristics:
♦Quick positioning, long-lasting adhesion
♦Non-corrosive, accidentally contaminated, can be cleaned with soapy water
♦ After curing, it is non-toxic, water-resistant, moisture-proof, and has good weather resistance, aging resistance, and UV resistance
Curing mechanism:
Marble glue is a modified unsaturated polyester resin adhesive, and its curing mechanism is to react and cure with a curing agent to become a solid. The higher the temperature, the faster the curing; the curing speed slows down appropriately in the low temperature environment.
Chemical resistance:
The product can be resistant to fresh water, sewage, waste water, calcium carbonate aqueous solution, detergent, low acid, corrosive water solution, etc. for a long time, short-term resistant to mineral oil, vegetable oil, fat, fuel, and not resistant to organic solvents, paint thinners, and high-concentration acids Alkali etc.
Application scope:
Marble glue is suitable for fast positioning, repairing, bonding, and mosaic of natural stone, artificial stone, ceramics, and vitrified tiles.
How to use
1. Preliminary preparation
The surface of the object to be bonded should be clean, dry and free of oil and dust.
2. Mixed glue
According to the ratio of marble glue and curing agent between 100:24, the overall performance is good. Stir until it is even and the color is consistent before use.
The mixed glue should be used up within 3 minutes.
Matters needing attention
Never put the mixed glue back into the bucket
Sizing in a ventilated environment
♦In the initial stage of curing, the colloid cannot bear heavy load or move
♦ For special chemical reactions, please contact the technical department of our company
Packaging:
20KG / barrel
Storage method:
Storing in an environment of 10~30 degrees Celsius, the high temperature cannot be higher than 30.
Safety and health:
Marble glue products are non-toxic and the same as general chemicals, and cannot be in contact with food or food utensils. It is recommended to maintain adequate ventilation in the working environment. If it gets into the eyes or mouth, rinse immediately with water. Store in a safe place away from children.
