HY566 stone-resistant paint, referred to as PVC paint, has the advantages of solvent-free, isocyanate-free, anti-pollution after curing, green environmental protection, excellent heat resistance and anti-aging ability.
Product Description:
HY566 is a one-component modified polyvinyl chloride coating, referred to as PVC coating, which has the advantages of no solvent, no isocyanate, anti-pollution after curing, green environmental protection, excellent heat resistance and anti-aging ability. It is suitable for coating and protection of anti-stone attack parts of automobile chassis, train carriages and other equipment. This product meets environmental protection requirements, does not contain harmful substances in GB18583 "Limits of Hazardous Substances in Adhesives for Interior Decoration Materials", meets the EU ROHS and REACH environmental protection standards, and meets the German environmental protection standards for automotive adhesives. To
Product Features:
♦No solvent, no silicone, no isocyanate, non-toxic, neutral and environmentally friendly.
♦Excellent resistance to stone attack.
♦No primer is required, and it has excellent bonding properties to most metals such as aluminum, painted steel plates, and PVC, ABS, and polyester materials.
♦Excellent weather resistance, aging resistance, superior tensile and compression resilience.
Curing mechanism:
HY566PVC sealant, curing method is heating curing. The higher the temperature, the faster the curing; the general heating temperature is 160~180℃, and the time is about 30 minutes, and the customer can decide according to the actual operation process.
Resistant to chemical media:
The product can be resistant to fresh water, sewage, waste water, calcium carbonate aqueous solution, detergent, low acid, corrosive water solution, etc. for a long time, short-term resistant to mineral oil, vegetable oil, fat, fuel, and not resistant to organic solvents, paint thinners, and high-concentration acids Alkali etc.
Application range:
It is suitable for coating and protection of anti-stone attack parts of automobile chassis, train carriages and other equipment.
Instructions:
1. The spraying surface must be free of oil stains, dust, impurities, etc.;
2. Spray the paint uniformly according to the process requirements, and the thinnest part is greater than 1mm; when using a pneumatic gun, the air pressure is controlled at 0.4~0.8Mpa;
3. The product can be trimmed using traditional methods after curing.
Precautions:
♦Avoid construction under 5℃
♦For special chemical reactions, please contact our technical department
Packing specification:
Plastic bucket: 5 gallons (about 25kg)
Iron drum: 250kg
Storage method:
Must be stored in a low temperature and dry environment, with a shelf life of 3 months.
