Thoroughly solve the problems of loose, running circles and leakage of cylindrical fittings. Cylindrical matching parts such as bearings and shafts, bearings and bearing seats, pulleys and shafts, gears and shafts, bushes and holes.
Retaining agent for cylindrical parts
【 product information 】
Huayu cylindrical parts holding glue completely solves the problems of loosening, running circles and leakage of cylindrical fittings. Cylindrical mating parts such as bearings and shafts, bearings and bearing seats, pulleys and shafts, gears and shafts, bushings and holes, often use dimensional interference to achieve assembly strength. In this way, the two surfaces cannot be completely contacted, and the gap left is prone to leakage and loosening, which is also the source of wear and corrosion. Huayu series of cylindrical parts holding glue is an anaerobic glue, which can fill the matching gap 100%, does not shrink during curing, has good medium resistance, and completely solves the problem of loosening and leakage of cylindrical matching parts. At the same time, the use of retaining glue can replace interference and transitional fits with clearance fits, effectively preventing deformation caused by transitional fits.
HY609 Retaining Agent for Cylindrical Parts
General purpose, low viscosity, high strength, suitable for transition, interference and clearance fit. Retain the key and shaft, bearing, small motor rotor shaft, bushing, and improve the firmness of the press fit. Repair worn shaft-hole fittings and out-of-tolerance parts. Used for retaining parts with radial clearance ≤ 0.1mm.
HY620 Retaining Agent for Cylindrical Parts
High viscosity, high strength, suitable for use under high temperature conditions. It is suitable for holding valve sleeves, injection molding machine core sleeves, valve sleeves, cylinder sleeves, keyways, etc. Used for holding parts with a radial clearance of 0.1mm-0.3mm.
HY680 Retaining Agent for Cylindrical Parts
Medium viscosity, high strength, suitable for clearance fit or filter fit. Round holder sleeves, pulleys, gears, rotors, etc. Repair worn shaft-hole fittings and out-of-tolerance parts. Used for retaining parts with radial clearance ≤ 0.25mm.
[Packing specifications] 50ml/bottle, 10 bottles/box, 100 bottles/box; 250ml/bottle, 30 bottles/box.
